Laser cutting machines are used in the machining principle of the laser beam irradiation processing materials.
So how to the processing of materials has a certain light reflectance and it can put the laser beam part of
the energy reflected back, thus became a statement today. The higher the brightness of the processed
materials,the lower the corresponding processing effect .Such as: gold, silver, copper and some other high
reflective metal materials, using laser cutting machine cutting is not too ideal.Laser cutting machine
workpiece jagged situation, what is not a very big problem, usually operation should pay attention to the
following points can be.
1.Whether cutting machine too fast, which leads to the cutting is not neat, may consider appropriate to
2. Whether the output graphics format is BMP, low resolution etc.
3.Confirm whether too tight or too loose synchronization with laser cutting head and the cross beam, the
appropriate adjustment of elasticity.
4.Check the X axial tensioner, whether there is a long time work lead to wear
5.Metal laser cutting machine downtime state, confirmed that the car if there is a gap between head and slide block.
6.Check the status of laser reflective mirror slice have broken or loose, special attention should be paid to laser cutting
head side mirror slice and focus lens is installed firmly.
7.Check whether the appearance of measure bearing and bearing wheel wear condition.
liaocheng ray fine technology co.ltd