Availability: | |
---|---|
Quantity: | |
3W 5W 10W 15W
Ray Fine
845611
3D Dynamic Focus UV Laser Marking Machine for Curved Surface
*3D Dynamic Focus Laser Marking Machine not only can marking on flat surface , but also can engraving on Undulating surface,Curved Surface .
*3D Dynamic Focus Laser Marking Machine compared with the ordinary 2D laser marking machine system, the dynamic focusing system makes each marking point at the correct focal length, so the laser beam energy is stronger and more delicate, so the marking effect is better.
Machine Picture
355nm wavelength UV laser soure with water cooling pipe
3D UV laser scanning head
Motorized Z-axis and control switch
3D surfacemarking and curved surface marking
General 2D marking and engraving
3D Dynamic Focus UV Laser Marking Machine for Curved Surface
*3D Dynamic Focus Laser Marking Machine not only can marking on flat surface , but also can engraving on Undulating surface,Curved Surface .
*3D Dynamic Focus Laser Marking Machine compared with the ordinary 2D laser marking machine system, the dynamic focusing system makes each marking point at the correct focal length, so the laser beam energy is stronger and more delicate, so the marking effect is better.
Machine Picture
355nm wavelength UV laser soure with water cooling pipe
3D UV laser scanning head
Motorized Z-axis and control switch
3D surfacemarking and curved surface marking
General 2D marking and engraving
Model | RF-UV-3W | RF-UV-5W | RF-UV-10W | RF-UV-15W | |
Laser source brand | JPT | JPT | JPT | JPT | optional |
Laser source type | UV | UV | UV | UV | |
Center Wavelength | 355nm | ||||
Cooling type | Air cooling (10W 15W water cooling) | ||||
Marking Area | Most commonly:100mm / 200mm / 300mm | ||||
One time marking Depth | 0.03-0.08mm | ||||
Marking speed | 600character/s @ 100*100mm | ||||
Repeat Accuracy | <20μrad | ||||
Min. linear width | 0.01mm | ||||
Min. Character size | 0.1mm | ||||
Supply voltage | AC220/110V±10% 50/60hz | ||||
Control program | LenMark-3DS control system | ||||
Operation temperature | -5~50℃ |
NOTE: As lasers develop and advance,the date sheet may be adjusted.
Model | RF-UV-3W | RF-UV-5W | RF-UV-10W | RF-UV-15W | |
Laser source brand | JPT | JPT | JPT | JPT | optional |
Laser source type | UV | UV | UV | UV | |
Center Wavelength | 355nm | ||||
Cooling type | Air cooling (10W 15W water cooling) | ||||
Marking Area | Most commonly:100mm / 200mm / 300mm | ||||
One time marking Depth | 0.03-0.08mm | ||||
Marking speed | 600character/s @ 100*100mm | ||||
Repeat Accuracy | <20μrad | ||||
Min. linear width | 0.01mm | ||||
Min. Character size | 0.1mm | ||||
Supply voltage | AC220/110V±10% 50/60hz | ||||
Control program | LenMark-3DS control system | ||||
Operation temperature | -5~50℃ |
NOTE: As lasers develop and advance,the date sheet may be adjusted.