English  |
| Quantity: | |
|---|---|
RF-F-3D 100w RF-F-3D 60W RF-F-3D 50W
RAY FINE
845611
MOPA 100W 60W 50W Fiber Laser Marking 3D Dynamic Focusing Fiber Laser Engraving Machine for Mold Coins Deep Relief Engraving
Motorized Z axis:
The galvo head moving can be controlled by software or by manual button.
Marked samples
3D relief engraving
3D relief engraving
3D relief engraving
curve surface marking
| Model | YJ-F-50W | YJ-F-60W | YJ-F-100W |
| Fiber laser source brand | JPT | ||
| Fiber laser source type | MOPA | ||
| Output power | >50W | >60W | >100W |
| Laser beam quality M2 | <1.5 | <1.8 | |
| Max single pulse energy | 1.25MJ | 1.5MJ | |
| Pulse duration | 200ns | 2-500ns | |
| Frequency | 1-600khz | 1-4000khz | |
| Center Wavelength | 1064nm | ||
| Cooling type | Air | ||
| Marking Area | 100x100x30mm/200x200x80mm, if need bigger area, please send message to us | ||
| Max positioning speed | 8000mm/s | ||
| Min. Character size | 0.2mm | ||
| Supply voltage | AC110V 60HZ / AC220V 50HZ | ||
| Control program | Feeltek | ||
3D Feeltek galvo head
X Y Z three axis dynamic laser route.
600x600mm working area
200x200mm working area
3D controler
JPT MOPA laser source
High quality anodized aluminuim working table
High quality anodized aluminium pillar 17cm width
More question, please conact: sales05@rayfinetech.com, thank you:)
MOPA 100W 60W 50W Fiber Laser Marking 3D Dynamic Focusing Fiber Laser Engraving Machine for Mold Coins Deep Relief Engraving
Motorized Z axis:
The galvo head moving can be controlled by software or by manual button.
Marked samples
3D relief engraving
3D relief engraving
3D relief engraving
curve surface marking
| Model | YJ-F-50W | YJ-F-60W | YJ-F-100W |
| Fiber laser source brand | JPT | ||
| Fiber laser source type | MOPA | ||
| Output power | >50W | >60W | >100W |
| Laser beam quality M2 | <1.5 | <1.8 | |
| Max single pulse energy | 1.25MJ | 1.5MJ | |
| Pulse duration | 200ns | 2-500ns | |
| Frequency | 1-600khz | 1-4000khz | |
| Center Wavelength | 1064nm | ||
| Cooling type | Air | ||
| Marking Area | 100x100x30mm/200x200x80mm, if need bigger area, please send message to us | ||
| Max positioning speed | 8000mm/s | ||
| Min. Character size | 0.2mm | ||
| Supply voltage | AC110V 60HZ / AC220V 50HZ | ||
| Control program | Feeltek | ||
3D Feeltek galvo head
X Y Z three axis dynamic laser route.
600x600mm working area
200x200mm working area
3D controler
JPT MOPA laser source
High quality anodized aluminuim working table
High quality anodized aluminium pillar 17cm width
More question, please conact: sales05@rayfinetech.com, thank you:)
