How to use a laser marking machine?

Laser marking machines use laser beams to make permanent marks on the surface of various materials. Laser marking machines are mainly used in some applications that require finer and higher precision. So, how does a laser marking machine work? The following is an introduction to the use of laser marking machines.

Here is the content list:

Preparation

Steps for use

Preparation

Read the laser marking machine's operating instructions carefully and prepare the appropriate tools and products on time. Professional safety glasses must be worn before work. Check that the pump has the right level of electrolytic water and that the electrical system switch and circuit system are reliable before use.

Steps for use

Turn on the machine

Turn on the input power and turn on the key switch. At this time, the ventilation and cooling system of the machine are energized and the ammeter shows a value of about 7A. Then wait for 5 to 10 seconds, press the trigger button on the external control panel, the ammeter shows a zero value, and after 3 to 5 seconds, the krypton lamp lights up and the ammeter shows a value of 7A. (Refer to the laser power supply operation manual). Then turn on the power of the oscillator, followed by opening the computer and calling up the required marking file. Finally, adjust the laser power of the fiber laser marking machine to the working current (10~18A), and start marking.

Marking operation

Double-click the marking program icon to enter the program. Then select the marking file, double click on the date and time in the modified content, and click OK to finish the modification.

Marking test and printing position

On the table or production line, place a test piece of equal height to the marked workpiece (preferably choose the marked workpiece as the test piece) and confirm that the test piece is indeed stable. Marking is performed by operating the marking control software. To make the laser marking machine for metal marking the best effect, adjust the following steps: Adjust the focal distance by adjusting the light head lifting device. Adjust the parameters such as power and marking speed in the marking software. Enter the software, double-click the printing date and drag the mouse up and down to adjust the printing position to the right position. After completing the above steps, you can carry out the printing test. After the test is correct, make a note on the workpiece. After marking is completed, turn off the power of each component in reverse order.

Shutdown

Set the operating current of the laser marking machine for metal's laser power supply to the minimum (about 7A). Turn off the computer. Turn off the power to the oscillator. Press the stop button. Turn off the key switch. Disconnect the input power.

When it comes to laser marking machine suppliers, it is necessary to mention Liaocheng Ray Fine Technology Co. Our company specializes in the production of fiber laser marking machines for many years and is committed to providing quality products to the world.