  +86-635-8208968             info@rayfinetech.com
You are here: Home » News and Events » Precautions for laser cleaning machine

Precautions for laser cleaning machine

Views: 64     Author: 本站编辑     Publish Time: 2021-12-10      Origin: https://www.rayfinetech.com/

In the operation of the laser cleaning machine 1000w, attention must be paid to maintenance, and the usual attention to maintenance and maintenance can increase the service life of the equipment, save costs, and create greater benefits. Today, when environmental protection is promoted, laser cleaning machine is widely used in industry due to its non-contact, no thermal effect, and no mechanical force on the surface of the cleaning object. Next, let's take a look at the precautions of the laser cleaning machine. Here are some answers.

Here is the content list:

What are the precautions when using the laser cleaning machine?

Do the daily maintenance of the laser cleaning machine.

What are the precautions when using the laser cleaning machine?

First, follow the power-on sequence of the 500w laser cleaning machine: activate the pump (water cooler) initial, then activate the ability switch, and so activate the optical device switch. Once motility is down, shut down the optical device switch initial, then shut down the ability switch, and so shut down the pump (water cooler). Second, clean the laser cleaning machine chiller regularly every half a month, drain the machine's internal water, and then fill it up with new pure water (dirty water will affect the light output). Third, it is required to clean regularly and quantitatively every day, remove debris on the table, stopper, and guide rail, and spray lubricating oil on the guide rail. Fourth, the reflector and focusing lens should be scrubbed with a special cleaning solution every 6-8 hours. When scrubbing, use a cotton swab or cotton swab dipped in the cleaning solution to scrub in a counterclockwise direction from the center of the focusing lens to the edge, and care should be taken to prevent scratches and damage to the lens. Fifth, the method of cleaning the exhaust fan and the smoke pipe: when the smoke and dust are large during processing, the fan needs to be cleaned, the outer cover of the fan is removed, and the dust on the fan blades and the air passage is scraped with thin wood, and then a high-pressure gun is used and blow away the dust, and the method of cleaning the smoke pipe is the same as the method of cleaning the water of the exhaust fan.

Do the daily maintenance of the laser cleaning machine.

During the operation of the laser cleaning machine, an outsized quantity of corrosive dirt and smoke are generated throughout the process of the processed components. This smoke and dust will be deposited on the surface of the guide rail and linear shaft for a long time, which has a great impact on the processing accuracy of the equipment. And can type corrosion points on the surface of the linear axis of the guide rail, shortening the service life of the instrumentation. To make the fiber laser cleaning machine work normally and stably, and to ensure the processing quality of the product, the daily maintenance of the guide rail and linear axis must be done carefully.

Our official website is https://www.rayfinetech.com/. If you want to know more information about laser cleaning machine prices, you can communicate with us on the website. Our cheap laser cleaning machine is well received by everyone.

Liaocheng Ray Fine Technology Co., Ltd 

Quick Links

Leave a Message
​Copyright © Liaocheng Ray Fine Technology Co., Ltd. All Rights Reserved. Site Map
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.
×