Availability: | |
---|---|
Quantity: | |
RF-F-3D 100w
RAY FINE
845611
3D Laser Engraving Machine with JPT MOPA M7 100W Laser Source Dynamic Auto Focus Fiber Laser Engraver
Motorized Z axis:
The galvo head moving can be controlled by software or by manual button.
Marked samples
3D relief engraving
3D relief engraving
3D relief engraving
curve surface marking
Model | YJ-F-50W | YJ-F-60W | YJ-F-100W |
Fiber laser source brand | JPT | ||
Fiber laser source type | MOPA | ||
Output power | >50W | >60W | >100W |
Laser beam quality M2 | <1.5 | <1.8 | |
Max single pulse energy | 1.25MJ | 1.5MJ | |
Pulse duration | 200ns | 2-500ns | |
Frequency | 1-600khz | 1-4000khz | |
Center Wavelength | 1064nm | ||
Cooling type | Air | ||
Marking Area | 100x100x30mm/200x200x80mm, if need bigger area, please send message to us | ||
Max positioning speed | 8000mm/s | ||
Min. Character size | 0.2mm | ||
Supply voltage | AC110V 60HZ / AC220V 50HZ | ||
Control program | Feeltek |
3D Feeltek galvo head
X Y Z three axis dynamic laser route.
600x600mm working area
200x200mm working area
3D controler
JPT MOPA laser source
High quality anodized aluminuim working table
High quality anodized aluminium pillar 17cm width
More question, please conact: sales05@rayfinetech.com, thank you:)
3D Laser Engraving Machine with JPT MOPA M7 100W Laser Source Dynamic Auto Focus Fiber Laser Engraver
Motorized Z axis:
The galvo head moving can be controlled by software or by manual button.
Marked samples
3D relief engraving
3D relief engraving
3D relief engraving
curve surface marking
Model | YJ-F-50W | YJ-F-60W | YJ-F-100W |
Fiber laser source brand | JPT | ||
Fiber laser source type | MOPA | ||
Output power | >50W | >60W | >100W |
Laser beam quality M2 | <1.5 | <1.8 | |
Max single pulse energy | 1.25MJ | 1.5MJ | |
Pulse duration | 200ns | 2-500ns | |
Frequency | 1-600khz | 1-4000khz | |
Center Wavelength | 1064nm | ||
Cooling type | Air | ||
Marking Area | 100x100x30mm/200x200x80mm, if need bigger area, please send message to us | ||
Max positioning speed | 8000mm/s | ||
Min. Character size | 0.2mm | ||
Supply voltage | AC110V 60HZ / AC220V 50HZ | ||
Control program | Feeltek |
3D Feeltek galvo head
X Y Z three axis dynamic laser route.
600x600mm working area
200x200mm working area
3D controler
JPT MOPA laser source
High quality anodized aluminuim working table
High quality anodized aluminium pillar 17cm width
More question, please conact: sales05@rayfinetech.com, thank you:)