English  |
| Quantity: | |
|---|---|
50W 60W 100W 200W 300W
Ray Fine
845611
3D Laser Marking Machine
* 3D Dynamic Focus Laser Marking Machine not only can marking on flat surface , but also can engraving on Undulating surface,Curved Surface .
* The most importance is that 3D laser can do relief engraving on metals and Making small metal molds.
* 3D laser compared with the ordinary 2D laser marking machine system, the 3D dynamic focusing system makes each marking point at the correct focal length, so the laser beam energy is stronger and more delicate, and the marking effect is better.
Machine Picture
3D FEELTEK GALVO HEAD - F20
F20 series have Max 600x600mm working area
Technical Parameter
| Model | RF-F-50W 60W 100W 200W 300W |
| Fiber laser source | JPT |
| Laser wavelength | 1064nm fiber laser |
| Laser frequency | 1~4000khz |
| Laser pulse width | 2-500ns |
Marking area | 100x100mm 200x200mm 300x300mm 400x400mm 500x500mm 600x600mm |
| 3D galvo head | FEELTEK - 20 |
| Control software | Lenmark and Lenmark-3DS |
| Cooling | Air cooling |
| Voltage | AC110V 60HZ or AC220V 50HZ |
Application
3D metal engrave
3D marking / curved surface marking
General 2D marking and engraving
3D Laser Marking Machine
* 3D Dynamic Focus Laser Marking Machine not only can marking on flat surface , but also can engraving on Undulating surface,Curved Surface .
* The most importance is that 3D laser can do relief engraving on metals and Making small metal molds.
* 3D laser compared with the ordinary 2D laser marking machine system, the 3D dynamic focusing system makes each marking point at the correct focal length, so the laser beam energy is stronger and more delicate, and the marking effect is better.
Machine Picture
3D FEELTEK GALVO HEAD - F20
F20 series have Max 600x600mm working area
Technical Parameter
| Model | RF-F-50W 60W 100W 200W 300W |
| Fiber laser source | JPT |
| Laser wavelength | 1064nm fiber laser |
| Laser frequency | 1~4000khz |
| Laser pulse width | 2-500ns |
Marking area | 100x100mm 200x200mm 300x300mm 400x400mm 500x500mm 600x600mm |
| 3D galvo head | FEELTEK - 20 |
| Control software | Lenmark and Lenmark-3DS |
| Cooling | Air cooling |
| Voltage | AC110V 60HZ or AC220V 50HZ |
Application
3D metal engrave
3D marking / curved surface marking
General 2D marking and engraving
