Availability: | |
---|---|
Quantity: | |
RF-F-30W Cyclops version
RAY FINE TECH
Cyclops Camera Position Fiber Laser Marking System
The cyclops camera is not for automatic focusing. It is for marking position point setting.
We can see workpiece in software through the camera, then we can set the marking point via software on the photo directly.
Then we no need to move the workpiece to find the marking place. That means draw there, mark there.
The laser source we can apply brands:
IPG/JPT/RAYCUS/SPI etc
Cyclops Camera Position Fiber Laser Marking System
The cyclops camera is not for automatic focusing. It is for marking position point setting.
We can see workpiece in software through the camera, then we can set the marking point via software on the photo directly.
Then we no need to move the workpiece to find the marking place. That means draw there, mark there.
The laser source we can apply brands:
IPG/JPT/RAYCUS/SPI etc
Model | RF-F-20W |
Fiber laser source | 20W(30w,50w,60w) |
Long time power output stability | <3% |
Beam quality M2 | <1.5 |
Marking Area | 110mm×110mm |
Maximum pulse energy | 0.67mj |
Pulse duration | <130ns@20khz |
Laser beam diameter | 7+/-1mm |
Max working speed | 8m/s |
Laser spot size | 27.5μm |
Min. Character size: | 0.2mm |
Repetition Accuracy | +/-8 μrad |
Resolution image of cyclops | 1600x1200 |
Camera image display precision | 0.1mm/pixel |
Supply voltage: | AC110V 60HZ |
Control program | Genuine EZ-CAD control system Compatible with win7/8/10 |
Wavelength | 1064nm |
Pulse repeat rate range | 20-60KHZ |
Operation temprature | 0-40 degree |
Cooling type | Air cooling |
Power consumption | ≦500w |
Model | RF-F-20W |
Fiber laser source | 20W(30w,50w,60w) |
Long time power output stability | <3% |
Beam quality M2 | <1.5 |
Marking Area | 110mm×110mm |
Maximum pulse energy | 0.67mj |
Pulse duration | <130ns@20khz |
Laser beam diameter | 7+/-1mm |
Max working speed | 8m/s |
Laser spot size | 27.5μm |
Min. Character size: | 0.2mm |
Repetition Accuracy | +/-8 μrad |
Resolution image of cyclops | 1600x1200 |
Camera image display precision | 0.1mm/pixel |
Supply voltage: | AC110V 60HZ |
Control program | Genuine EZ-CAD control system Compatible with win7/8/10 |
Wavelength | 1064nm |
Pulse repeat rate range | 20-60KHZ |
Operation temprature | 0-40 degree |
Cooling type | Air cooling |
Power consumption | ≦500w |