Product News

2026

DATE

08 - 03

[Product News] Fiber Laser vs UV Laser with Camera Positioning: Which Should You Choose?

A camera positioning system can help a laser locate the correct marking area, but it does not determine whether the laser can produce the required result on the material.That decision depends primarily on the laser source.

2026

DATE

07 - 30

[Product News] Cyclops Camera vs CCD Vision Positioning for Laser Marking

A Cyclops camera and a CCD vision positioning system can both help place a laser mark on the correct area of a workpiece. However, they do not normally perform the same task.

2026

DATE

07 - 27

[Product News] How to Choose a Fiber Laser Engraving Machine with Camera Positioning

Choosing a fiber laser engraving machine with camera positioning requires more than comparing laser power and camera resolution.

2026

DATE

07 - 23

[Product News] Common Camera Positioning Errors in Laser Marking and How to Fix Them

A camera can make laser marking faster and easier to position, but only when the camera image, laser coordinates, working height, and actual workpiece remain correctly aligned.

2026

DATE

07 - 20

[Product News] What Materials Can a Camera-Positioned Fiber Laser Mark and Engrave?

A camera-positioned fiber laser can mark or engrave many metals, coated metal parts, and selected industrial plastics. However, the camera does not determine whether a material is compatible with the laser.

2026

DATE

07 - 16

[Product News] Camera Positioning vs Fixtures: Which Is Better for Laser Marking Small Parts?

Small parts can be difficult to position for laser marking. A minor shift or rotation may place a serial number too close to an edge, move a logo away from the visual center, or cause a code to overlap an existing feature.

2026

DATE

07 - 13

[Product News] How to Calibrate a Cyclops Camera for Accurate Laser Marking

A Cyclops camera can show the workpiece and marking design together in the laser software, but the image alone does not guarantee that the laser will mark the position shown on the screen.Accurate camera positioning depends on a calibrated relationship between three elements.

2026

DATE

07 - 09

[Product News] Cyclops Camera vs Red-Light Preview for Laser Marking

Before starting a laser marking job, the operator needs to confirm where the design will appear on the workpiece. Two common ways to perform this check are a red-light preview and a Cyclops camera positioning system.

2026

DATE

07 - 06

[Product News] How Does Cyclops Camera Positioning Improve Fiber Laser Engraving Accuracy?

A fiber laser may be capable of producing fine lines and detailed marks, but the result can still appear inaccurate if the design is placed in the wrong position. This often happens when small parts are loaded manually, workpieces are slightly rotated, or a logo must align with an existing hole, edge, label, or recessed area.

2026

DATE

07 - 02

[Product News] What Is a Cyclops Camera Positioning System for Laser Marking?

Placing a logo, serial number, barcode, or graphic in the correct position can be difficult when workpieces are small, irregular, or loaded manually. Even if the laser can produce a clear mark, slight movement of the part may cause the design to appear off-center or outside the intended area.

Quick Links

Products List