Fiber laser marking machine is the new generation laser marking system developed with advanced laser technique. It adopts fiber laser to output laser and achieves to marking function after high speed scan ioscillating mirror system. It has higher photoelectric transfer efficiency. This machine adopts air cooling way and the whole machine is small. The output beam is qualified, high reliability.
- Silicone Keypad Marking
- Metal Deep Engraving
- Metal Surface Processing marking engraving
- High Frequency Line Processing
1. JPT LP mopa laser with pulse duration adjustable with best laser beam quality
2 .Small size, one unit structure and user-friendly operation.
3. Double red dots and motorized Z axis more easy to get focus.
4.Maintenance-free and 100 000 hours long life time with 3 years warranty
5. Quality electric parts.
6. Best quality digital scan head.
7. Genuine EZCAD control program compatible with win7/win8/win10
Fiber laser source
Laser beam quality M2
Max single pulse energy
Full power frequency range
Frequency adjustable range
How to get focus
Double red dots
One time marking Depth
Min. linear width
Min. Character size
Genuine EZ-CAD(BJJCZ) control system
Compatible with win7/8/10
1. Rotary advice:used for curved surface marking
2. 2D worktable:
X Y axis adjustable worktable can achieve very small position movement of work-piece via adjust the worktable.
So if the work piece's position need very small movement, we no need to move the work-piece, just to adjust the
worktable by X and Y axis's handle
3.Rotating worktable : Carry the marking workpiece and at same time rotation to achieve multi-angle marking.The rotation angle can be set arbitrarily based on your need
4.Goggles:protect your eyes
5.LENS:working care can be 70x70mm/110x110mm/150x150mm/200x200mm/300x300mm for option .
We can choose different size lenses in one machine for different works.
6.Cyclops camera position:
We can see work-piece in software through the camera.
Then we can set the marking point via software on the photo then we no need to move the work-piece to find the marking place.
That means draw there, mark there
7.Conveyor belts:For pen marking
8.Auto Focus :
When we mark work-pieces with different height, the displacement transducer can Automatically sense workpiece height .
Then the machine will be up and down the laser head by itself.
No need move the laser head up and down by hand when marking workpieces with different height.
9.3D DYNAMIC FOCUS :
Mainly usd for marking on curved surface;
Relief marking ; 3D marking